|
- Maximizes material usage
- Reduces handling and thereby increases efficiency
- Increases shearing accuracy
- Allows accurate gauging of large sheets
- Reduces personnel needs; i.e.: can do with one operator, what may take up to three previously.
- Eliminates problems with sheet sag
|
|
|
- High accuracies achieved with precision ball screws
- Drive system operates at over 900 in/min
- Easy mechanical adjustment for calibration
|
|
- Heavy-duty steel construction, 1" wide, and air activated; only desired
finger raises at position to reduce scratching of workpiece and minimizes
operator error.
|
|
|
- Normally located on the left side of the shear, the squaring arm is fully
adjustable via a machined bar bolted to the top surface to allow for accurate shearing.
- A stainless steel ruler is recessed into the arm and table to enable easier measurement.
- Ball transfers are mounted into the squaring arm for ease of material handling.
- Squaring arms can also be ordered for the opposite end of the shear table.
|
|
|
- Integrated control allows for operation of both frontgauge and backgauge from one control.
- Digital display can toggle between frontgauge and backgauge as required.
- Digital readout to .001"
- Retract function allows the stops to retract (backgauge
or frontgauge) so that material doesn't wedge between the
shear knives and the fingers.
- Programmable auto-step can switch between frontgauge and backgauge as required.
- Ninety-nine pre-select backgauge/frontgauge settings.
|
|
